Product Description And Specifications - Bosch GDS Professional 24 Notice Originale

OBJ_BUCH-548-002.book Page 11 Friday, September 6, 2013 9:43 AM
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
Technical Data
Impact Wrench
Article number
Rated power input
Output power
No-load speed
Max. torque for hard/soft screwdriving application according to
ISO 5393
Right/left rotation
Max. screw dia.
Tool holder
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K de-
h
termined according to EN 60745:
Tightening of bolts and nuts of the maximum permitted size:
a
h
K
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
Bosch Power Tools
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Suspension hook
2 Auxiliary handle
3 Threaded for auxiliary handle
4 On/Off switch
5 Rotational direction switch
6 Tool holder
7 Tool bit
8 Handle (insulated gripping surface)
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
GDS 24
0 601 434 1..
W 800
W 400
-1
min 1260
Nm 600/300
M 24
 ¾"
kg 5.7
/ II
GDS 24
0 601 434 1..
dB(A) 95
dB(A) 106
dB
2
m/s 8.0
2
m/s 1.5
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
English | 11
GDS 30
0 601 435 1..
920
500
1260
1000/500
 
M 30
 1"
7.3
/ II
GDS 30
0 601 435 1..
99
110
3 3
11.5
1.9
3 609 929 C78 | (6.9.13)