Husqvarna TS 138 Manuel D'utilisation page 20

Introduction
WARNING:
safety chapter before you do maintenance
on the product.
Maintenance schedule
Maintenance schedule
Product Do a check of the brake
function.
Do a check of tire pres-
sure.
Do a check of the op-
erator presence control
(OPC).
Do a check of the reverse
operation system (ROS).
Do a check for loose fas-
teners.
Examine the blades for
wear and damage.
Lubricate the product. Re-
Lubrication sched-
fer to
ule on page 21 .
Do a check of the battery
level.
Clean the battery and the
terminals.
Clean pieces off the
steering plate. Refer to
clean the product on page
22 .
Do a check of the trans-
axle cooling fan.
Make sure that the cutting
deck is level.
Do a check of the V-belts.
2
20
Maintenance
Read and understand the
Before
each
use
X
X
X
X
X
To
Examine the blades more frequently if you cut where there is sand and soil.
At inter- At inter- At inter-
vals of 8 vals of vals of
hours 25 hours 50 hours
X
X
2
X
X
X
X
X
X
At inter- Each
vals of season
100
hours
X
X
X
1701 - 009 - 14.07.2023
Before
storage
X
X
X