Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Your appliance is designed and manufactured for a long life span
and reliable operation.
If a malfunction nonetheless occurs during operation, check
whether it is due to an operating error. Please note that even dur-
ing the warranty period the resultant servicing costs in this case
will have to be borne by the owner.
You may be able to rectify the following faults by checking the
possible causes yourself:
Malfunction
Possible cause and remedy
-
______________________________________________
Appliance does not work, display is off
- Is the appliance switched on properly?
- Is the mains plug properly inserted in the socket?
- Is the socket fuse intact?
The interior light does not come on
- Is the appliance switched on?
- Has the door been open for more than 15 minutes? The interior
light switches off automatically after the door has been opened
for approx. 15 minutes.
- If the interior light does not switch on when the door is opened
briefly, but the temperature display is working, the light may be
defective.
Mains Voltage
Important!
To prevent injury or damage, always ask our
customer service department to carry out any repairs and
replace the LED interior light.
Caution - class 1M laser radiation. When cover
is removed, do not look directly at light through
optical instruments.
Loud running noise
- Is the appliance standing firmly on the floor, or does the com-
pressor cause nearby items of furniture or objects to vibrate?
If necessary, move bottles and containers apart.
Burbling noises
-
are normal. These are caused by the refriger-
ant flowing round the refrigerant circuit.
clicking sound
A short
: This will be heard whenever the
refrigeration unit (the motor) switches on or off automatically.
Motor noise
: This will be slightly louder for a brief period when
the refrigeration unit switches on.
The audible warning signal sounds
- Is the appliance closed properly?
Check the appliance as described in "Audible warning sig-
nal".
The temperature is not cold enough
- Is the temperature setting correct? If necessary, set a lower
temperature and check the display after 24 hours.
- Does the door close properly?
- Is the appliance built in properly?
- Is the appliance sufficiently well ventilated?
Clear ventilation grilles if necessary.
- Is the ambient temperature too hot? (See "Safety regula-
tions")
- Has the appliance been opened too often or left open too
long?
- If applicable, wait until the appliance reaches the required
temperature itself.
All manuals and user guides at all-guides.com
Customer service and type plate
If none of the above causes apply and you cannot rectify
the fault yourself, or if the temperature display reads "F0"
to "F5", this means that there is a fault. Please contact your nearest
customer service department (see enclosed list for addresses),
indicating the
as given on the type plate. This
will help us to provide you with
a faster and more accurate
service. The type plate is lo-
cated on the inside left of the
appliance next to the bottom
Climat-Freshbox drawer.
Leave the appliance shut until the customer service engineer ar-
rives so as to prevent any further cold loss.
_______________________________________________
All types and models are subject to continuous improvement and
the manufacturer therefore reserves the right to make modifications
in the shape, equipment and technology.
*
Depending on model and options
fault number displayed
type designation
,
1
service number
and
2
appliance number
3
GB
, together with the
25
Publicité
