Publicité
English
GENERAL INFORMATION
Position the cup (or cups) under the coffee delivery spout (1).
If necessary, adjust the height of the delivery spout by keeping the
brake button (2) pressed and sliding the spout upwards or downwards.
Press the coffee dispensing key for the dose required, the led relative
to the key pressed lights up and the coffee is delivered.
Delivery terminates automatically.
Delivery of powdered coffee for machines without automatic
dosers (7).
After having positioned the cup under the spout, lift the decaffeinated
coffee panel (18) and measure out a dose of powdered coffee into the
tube and close the powdered coffee panel (18). The leds relative to the
keys programmed for one cup located on the display panel (3) will
flash.
Press one of the keys associated to the flashing leds that corresponds
to the desired dose.
Delivery terminates automatically.
Delivery of decaffeinated coffee for machines with automatic dosers
(7) (optional).
After having positioned the cup under the spout press one of the keys
associated to the automatic doser (7) that corresponds to the desired
dose.
Delivery terminates automatically.
OPTIONS
The keys described herebelow may only be activated by the technician
installing the equipment.
Coffee STOP function
This function stops the delivery of the coffee before the programmed
dose has been reached.
The STOP key is active from the moment the coffee starts pouring into
the cup and not while the coffee is being ground.
If the STOP key is pressed immediately after delivery has terminated,
the dose in the cup is increased.
To stop the outpour of coffee, press the STOP key again.
N.B. Pressing the STOP key does not change the programmed
parameters.
HOT WATER: GENERAL INFORMATION
Position the appropriate container under the hot water outlet (14).
Delivery can be made with automatic dose or continuously.
Automatic dose delivery
Press one of the hot water dispensing keys corresponding to the selected
dose.
The programmed hot water will pour from the hot water outlet (14) and
stop automatically.
Delivery can be stopped by pressing the STOP key.
N.B. If the STOP key is pressed the programmed values will not be
changed.
Continuous delivery
Keep one of the hot water dispensing keys pressed. When the desired
dose is reached, release the key to stop delivery.
All manuals and user guides at all-guides.com
3.
Drinks – Coffee Dispensing
3.1 Drinks dispensing – hot water/steam
SECOND BLEND function - only for machines with double grinder-
doser - (if programmed)
Allows the coffee to be ground with grinder-doser “2” (MM2) for all the
drinks associated with grinder-doser “1” (MM1).
When the second blend key is pressed all the leds associated with
grinder-doser “1” will flash.
When one of the dispensing keys corresponding to the desired dose is
pressed, the grinding phase is performed by grinder-doser “2” while
maintaining all the set parameters (water dose, coffee dose).
N.B. Before dispensing, to cancel the second blend function press key
(Ms) again.
REPEAT function (N°) (if programmed)
Allows the same type of drinks to be repeated a number of times.
Keep the repeat key pressed until the number of desired deliveries is
displayed.
The leds of the keys associated with the “N°” function will flash.
Then press the desired key. The number of coffees previously selected
will be delivered consecutively.
To stop the repetition of the delivery of the drinks, press the coffee key
corresponding to the selected dose once again (it is highlighted by the
lighted led). Delivery will terminate.
N.B. Before dispensing, to cancel the repeat function press the repeat
key again.
STEAM: GENERAL INFORMATION
Completely emerge the steam pipe (15 or 20) in the container holding
the drink to be reheated.
Delivery with push-button (13a)
Press the steam dispensing push-button.
Wait until the drink has reached the desired temperature.
Stop delivery and press the steam key (13a) again or press STOP.
Delivery with tap (13 or 21)
Turn the steam dispensing tap.
Wait until the drink has reached the desired temperature.
Stop delivery by rotating the dispensing knob in the opposite direction.
Note: At the conclusion of each steam dispensing phase,
clean the inside of the steam nozzle as follows:
Turn the nozzle towards the cup tray and carefully
activate steam dispensing at least once.
English
Publicité
