JVC KD-R995BTS Manuel D'instructions page 9

GETTING STARTED
F/W UPDATE
UPDATE SYSTEM
F/W UP YES: Starts upgrading the firmware. ;
xxxx NO: Cancels (upgrading is not activated).
For details on how to update the firmware,
visit <http://www.jvc.net/cs/car/>.
FACTORY YES: Resets the settings to default (except the
RESET stored station). ; NO: Cancels.
CLOCK
TIME SYNC ON: The clock time is automatically set using
the Clock Time (CT) data in FM Radio Broadcast
Data System signal/FM Radio Data System
signal. ; OFF: Cancels.
CLOCK ON: The clock time is shown on the
DISPLAY display even when the unit is turned off. ;
OFF: Cancels.
ENGLISH Select the display language for menu and
music information if applicable.
ESPANOL
By default, ENGLISH is selected.
RADIO
"ST" or "STEREO" lights up when receiving an FM stereo broadcast with sufficient signal strength.
Search for a station
1
Press repeatedly to select FM or AM.
2
Press (or press
(or)
Press and hold (or press and hold
then press repeatedly to search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the volume knob until "PRESET MODE" flashes.
2 Turn the volume knob to select a preset number, then press the knob.
The preset number flashes and "MEMORY" appears.
Select a stored station
Press one of the number buttons (1 to 6).
(or)
1 Press .
2 Turn the volume knob to select a preset number, then press the knob.
on the remote control) to search for a station automatically.
on the remote control) until "M" flashes,
5
ENGLISH