Publicité
Les langues disponibles
Les langues disponibles
DISPLAY SETTINGS
MENU COLOR
ON: The color of button illumination
changes to white color when in menu
mode or when selecting a music file
from a folder/list.; OFF: Cancels.
*
1
The illumination control wire connection is required.
( 42)
*
2
Some characters or symbols will not be shown correctly
(or will be blanked).
*
3
If one of these color pattern is selected, the [ZONE 1]
and [ZONE 2] illumination colors will change to the
default colors.
LEARNING STEERING REMOTE CONTROL
You can control the unit with the steering remote control keys on your vehicle. After connection,
you can configure the control keys according to your preference.
• You can only make this configuration if your vehicle is equipped with the electrical steering
remote control.
• If the steering remote control in your car is not compatible, configuration may not be completed
and an error message may appear. ( 36)
Make the connection
Steering remote
cable (supplied)
Learning steering
remote input terminal
Rear panel
Configure the control keys
1
Press and hold
.
2
Turn the volume knob to select [SYSTEM], then press the knob.
3
Turn the volume knob to select [USER S.REMO], then press the knob.
4
Turn the volume knob to select [SET KEY], then press the knob.
A key list of 16 assignable keys appears.
• K## NONE: No function has been assigned.
5
Turn the volume knob to select any key from the key list to assign the function, then press
the knob.
"PRESS KEY TO ASSIGN K##" appears.
Gray/red
Connect to your vehicle's steering
Bright green/red
remote harness. Contact your JVC
dealer for details.
Purple/red
(for KD-R792BT)
31
ENGLISH
Publicité
