Ryobi P600 Mode D'emploi page 8

KNOW YOUR LAMINATE TRIMMER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
DEPTH OF CUT SCALE
Your trimmer has an adjustable depth of cut scale on each
side of the tool.
DUAL GRIP
Your trimmer is designed for either right-handed or left-
handed operation.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Laminate Trimmer
Collet/Latch Adjustment Wrench
Operator's Manual
All manuals and user guides at all-guides.com
FEATURES
ASSEMBLY
8
LAMINATE SUB-BASE
The sub-base gives the operator greater visibility of the
workpiece during laminate trimming operations.
OPTIONAL TRIM ROUTER SUB-BASE
(NOT INCLUDED)
Easily adapts the tool from a trimmer to a trim router capable
of light-duty routing operations.
SPINDLE LOCK
The spindle lock button allows quick bit changes.
SWITCH
The ON/OFF switch is located on the back of the motor
housing, facing the operator.
WARNING:
If any parts are missing do not operate this tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
tool when assembling parts.