Ryobi P600 Mode D'emploi page 5

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.
SYMBOL
V Volts
A Amperes
Hz Hertz
W Watt
min Minutes
Alternating Current
Direct Current
n o
No Load Speed
Class II Construction
.../min Per Minute
Wet Conditions Alert
Read The Operator's Manual
Eye Protection
Safety Alert
No Hands Symbol
No Hands Symbol
No Hands Symbol
No Hands Symbol
Hot Surface
All manuals and user guides at all-guides.com
SYMBOLS
NAME
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand operator's
manual before using this product.
Always wear safety goggles or safety glasses with side shields and,
as necessary, a full face shield when operating this product.
Precautions that involve your safety.
Failure to keep your hands away from the blade will result in seri-
ous personal injury.
Failure to keep your hands away from the blade will result in seri-
ous personal injury.
Failure to keep your hands away from the blade will result in seri-
ous personal injury.
Failure to keep your hands away from the blade will result in seri-
ous personal injury.
To reduce the risk of injury or damage, avoid contact with any hot
surface.
DESIGNATION/EXPLANATION
5