Beko GNE 15906 S Mode D'emploi page 20

Cleaning the water reservoir
Remove the water reservoir as illustrated,
open the side latches and detach the upper
lid mechanism and reservoir apart. Clean the
water reservoir with warm water, install the
upper lid mechanism and fasten the latches.
While installing the reservoir to its place,
make sure that the hooks at the rear side of
the reservoir fits completely on the the
hanger in the door of the refrigerator. If you
have removed any other parts during
cleaning, make sure that they are correctly
installed to their places. Otherwise, water
leakage may occur.
(Washing in the dishwasher may cause the
water reservoir to get scratched.)
18
EN