Beko GNE 15906 S Mode D'emploi page 10

Floor balance adjustment
If your refrigerator is unbalanced;
1. You can balance your refrigerator by turning the front legs of it as illustrated in the
figure. The corner where the leg exists is lowered when you turn in the direction of
black arrow and raised when you turn in the opposite direction. Taking help from
someone to slightly lift the refrigerator will facilitate this process.
2. After the balance issue is remedied, install back the ventilation cover and fasten the
screws provided that there is no misalignment between the doors. If there is a
misalignment between the doors, install back the ventilation cover only after performing
the steps indicated in section "Height adjustment" in the following page.
3. Remove the screws fastening the lower ventilation cover using a Philips screwdriver
in the order shown in the figure.
4
1 2
8
EN
3