Christopeit Sport TM780 Notice De Montage Et D'utilisation page 16

Step 4:
Checks and How to start
When everything is in order, connect the power supply cable (31)
with wall power (220-240V~50-60Hz) and switch on the main
switch (32) below the front frame.
Put the safety key (51) onto the computer (5) and the computer will
show normal manual mode. Put the safety clip (51) at your exercis-
ing cloth and stand on the side rails (15).
Press Start-button and after a 3 sec. Count Down the treadmill start
moving. Start walking onto the walk surface (16) when speed is
slowly and follow the speed. Familiarize yourself with the machine
at low speed settings.
Run in the middle of the running surface (16) and hold yourself
tight at handgrips (6+7) if you feel insecure. Don't step on the side
foot rails (15). Only run with look at the Computer on the treadmill
during the running. In emergency case, step of the treadmill lateral
and hold onto the handgrips (6+7).
Note:
Please keep the instructions in a safe place as it may be required
for repairs or spare parts orders becoming necessary later.
16