Publicité
Les langues disponibles
Les langues disponibles
CONNECTION/INSTALLATION
CONNECTION/INSTALLATION
Connection
Connecting wires to terminals
6
10 A fuse
See page 48.*
2
1
White ª / White with black stripe · : To front speaker (left)
Gray ª / Gray with black stripe · : To front speaker (right)
Green ª / Green with black stripe · : To rear speaker (left)
Purple ª / Purple with black stripe · : To rear speaker (right)
Blue (Power antenna wire)
Blue with white stripe (Remote output wire)
Light blue with yellow stripe (Steering remote control wire)
Orange with white stripe (Dimmer control wire)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
See page 48.*
2
(POWER ANTENNA)
(REMOTE OUTPUT)
(STEERING WHEEL REMOTE)
USB terminal (0.8 m): See page 48.*
1
Connect the antenna cord to the
antenna terminal.
See page 48.
Purple with white stripe
(Reverse sensor wire)
Light green (Parking sensor wire)
*
3
To automatic antenna if any (250 mA max.)
To the remote lead of other equipment (200 mA max.)
To the OE remote adapter matching your car
To car light control switch
(ILLUMI)
(ACC)
(BATT)
(GND)
Connect to the vehicle's steering remote harness.
Contact your JVC dealer for details.
*
Only for KW-V41BT.
1
*
2
Only for KW-V41BT/KW-V21BT.
*
If no connections are made, do not let the cable come out
3
from the tab.
Connect to the vehicle's reverse lamp harness when using
the optional rear view camera.
Connect to the vehicle's parking
3
brake detection switch harness.
• For best safety, be sure to
connect the parking sensor.
Ignition key switch
To car chassis
Fuse box
Battery
ENGLISH
47
Publicité
