JVC KW-V41BT Mode D'emploi page 34

SETTINGS SETTINGS
Adjusting the crossover frequency
1
Display the <X'over> screen.
On the Home screen:
2
Select the item to adjust (1), then make
adjustments (2).
34
<HPF> Adjusts the crossover for the
front/rear speakers (high pass
filter).
<LPF> Adjusts the crossover for the
subwoofer (low pass filter).*
<Level> Adjusts the subwoofer level.*
<Phase> Selects the phase for the
subwoofer.*
2
<Freq> Adjusts the crossover frequency.
* Adjustable only when the subwoofer is activated. (Page 39)
1
Not selectable when <Freq> is set to <Through>.
*
2
Adjustment for video playback
Adjusting the picture
You can adjust the picture quality.
1
Display the adjustment menu.
• When the App or navigation*
displayed, you can press and hold DISP (for
KW-V41BT)/ (for KW-V21BT/KW-V11) on
the monitor panel to switch to the picture
adjustment menu.
2
Select [DIM ON] (dimmer on) or [DIM OFF]
(dimmer off).
1
1
3
Adjust the picture (–15 to +15).
<Bright>
<Contrast>
<Black>
<Color>
<Tint>*
2
<Sharpness> Adjusts the sharpness.
* Navigation is available for KW-V41BT/KW-V21BT only.
1
* 2 Adjustable only when the incoming signal is NTSC.
1 screen is
Adjusts the brightness.
Adjusts the contrast.
Adjusts the blackness.
Adjusts the color.
Adjusts the tint.