Explanation Of The Symbols - Husqvarna TS 1000 F Manuel D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
EXPLANATION OF SYMBOLS – WARNINGS

Explanation of the symbols

Use of pictograms on the machines (in color) and in the
manual indicate safety warnings
WATCH OUT! DANGER! General danger
signal.
REQUIREMENT. The following must
always be used with the machine:
• certified safety helmet
• certified ear protection
• certified safety goggles or certified
eyeshade.
Carefully READ and assimilate the user's
manual before operating the machine.
WARNING. Triangle and black marking on
yellow background. Danger if instructions
are ignored. Risk of injury to user or third
party. Risk of damage to machine or tool.
PROHIBITED. Red circle with or without
diagonal bar. Use or presence forbidden.
INFORMATION or specific instructions on
how to use or check the machine.
This machine complies with the EC
directive in force.
STOP symbol.
Safety goggles or eyeshade must be worn.
Loud noise in environment as defined by
European Community directive.
2 - English
Disk rotation must stop when moving the
machine at the work site.
Disk must be removed during slinging,
loading, unloading and transport at the
worksite.
Symbol on the product or its packaging
showing that this product must not be
treated as household waste. It must be
deposited at a collection point approved for
recycling of electric or electronic devices.
By complying with proper disposal
procedure when the product becomes
obsolete, you help prevent environmental
or health hazards that could result from
mishandling the product. For further
information on the recycling of this product,
please contact your city hall, local waste
drop-off center or the store where you
bought the product.

Publicité

Table des Matières
loading

Table des Matières