Télécharger Imprimer la page

Tecnimed VisioFocus Pro Mode D'emploi page 17

Publicité

Les langues disponibles

Les langues disponibles

INTENDED USE: VisioFocus
intermittent measurement of human body temperature in people of all ages
(professional use).
Each non contact thermometer needs to be stabilized at the room temperature.
VisioFocus PRO is equipped with 2 quick calibration systems, which allows the
thermometer to quickly stabilize at the room temperature: the MQCS (Manual Quick
Calibration System) and the AQCS (Automatic Quick Calibration System). See par. # 8.
Additionally, VisioFocus PRO foresees two different settings:
-
"NURS" (default setting): the MQCS is requested and mandatory every 30 minutes.
This setting is highly recommended for nurses who take many measurements moving
from room to room as well as for any intensive use, such as in airports etc. The
"HOME"
button is disabled. The "Mem"
enabled by changing the settings (see par. 7).
-
"DOCT": the MQCS is not mandatory, but if the thermometer's temperature is
changing, the AQCS (Automatic Quick Calibration System) is automatically activated
and allows the rapid stabilization of the thermometer to the room temperature: the
display shows a countdown indicating the time required for its stabilization.
To make a measurement is necessary to wait the end of the countdown without
touching the device. Alternatively, at any time, it is possible to do the manual MQCS
(suggested procedure). In "DOCT" mode the "HOME"
buttons are enabled.
Please note that if the thermometer set in "DOCT" is used too frequently and
intensively (as in an hospital department) the system will ask the user to make
the MQCS anyway (although with some delay).
To change the setting from "NURS" to "DOCT" – and vice-versa – see par. #7.
VisioFocus PRO is specifically studied to be used in a hospitals, ambulances or
clinic environments, but also airports, schools, factories, etc. in case of emergency
and/or pandemic situations where it is necessary to take several fast and hygienic
temperature readings.
VisioFocus PRO is:
-
hygienic: never touches the patient, does not need disinfection and does not require
expensive disposable caps;
-
comfortable: as it is totally not invasive, there is no need to wake up the patient or
to ask for his cooperation while taking the temperature;
-
accurate: detects the body temperature with constancy, repeatability and accuracy;
-
unique: it cancels all variables which can't be monitored by and do not depend on
the health worker (i.e. the presence of earwax during a tympanic measurement or
the displacement of the thermometer during the armpit or oral measurement). With
VisioFocus PRO the user can be sure of having the total control on all measurements
made in the hospital ward.
PRO is an infrared thermometer intended for
®
IMPORTANT
1. FOREWORD
01 - English -
button is disabled and it can be
and the "Mem"

Publicité

loading

Ce manuel est également adapté pour:

06480