Getting Started; Turning On The System; Carrying The System; Placing The System Horizontally - Sony GTK-XB5 Mode D'emploi

Getting Started

Turning on the system

1
Connect the AC power cord
(supplied) to the AC IN jack on
the rear of the unit, and then
to the wall outlet.
AC power
cord
(supplied)
The system is turned on in the
demonstration mode and the
demonstration starts automatically.
2
Press  to turn on the system.
The  indicator lights up in green.
Deactivating the demonstration
Press LIGHT while the
demonstration is performed.
The demonstration ends and the
system enters the standby mode.
When you press LIGHT during
the standby mode, or when you
disconnect and reconnect the AC
power cord, the system enters the
demonstration mode.
8
GB
To wall outlet

Carrying the system

Before carrying the system, disconnect
all the cords.
Note
Correct hand placement while carrying the
system is very important to avoid personal
injury and/or property damage.
Placing the system
horizontally
You can also place the system horizontally
as illustrated below. (Place the rubber feet
side down.)