Sony GTK-XB5 Mode D'emploi page 13

2
Touch the BLUETOOTH device,
such as a smartphone or
tablet, to the N-Mark on the
unit until the BLUETOOTH
device vibrates.
Complete the connection by
following the instructions displayed
on the BLUETOOTH device.
When the BLUETOOTH connection
is established, the
indicator on the unit stops flashing
and remains lit.
3
Start playback of an audio
source on the BLUETOOTH
device.
For details, refer to the operating
instructions of your BLUETOOTH
device.
4
(BLUETOOTH)
If pairing and the BLUETOOTH connection
fail, perform the following.
— Remove the case from the smartphone
— Touch the smartphone to the N-Mark on
— Relaunch the "NFC Easy Connect"
To terminate the BLUETOOTH
connection
Touch the BLUETOOTH device to the
N-Mark on the unit again.
Adjust the volume.
Adjust the volume of the
BLUETOOTH device first. If the
volume level is still too low, adjust
the volume level on the system
using the volume +/– buttons.
BLUETOOTH
device
Hint
if using a commercially available
smartphone case.
the unit again.
application.
13
GB