Setting The Bluetooth Standby Mode; Turning On Or Off The Bluetooth Signal; Using "Songpal" Via Bluetooth - Sony GTK-XB7 Mode D'emploi

Setting the BLUETOOTH
standby mode
The BLUETOOTH standby mode
enables the system to turn on
automatically when you establish
the BLUETOOTH connection with a
BLUETOOTH device. This setting is
turned off by default.
This setting can only be configured
by using "SongPal." For details on
"SongPal," see "Using "SongPal" via
BLUETOOTH" (page 20).
Hint
Disable the BLUETOOTH standby mode to
reduce the power consumption in standby
mode (eco mode).
Turning on or off the
BLUETOOTH signal
You can connect to the system
from a paired BLUETOOTH device
in all functions when the system's
BLUETOOTH signal is set to on. This
setting is turned on by default.
Use the buttons on the unit to perform
this operation.
Hold down FUNCTION
and SPEAKER ADD on the rear
for more than 5 seconds.
Note
You cannot perform the following
operations when you turn off the
BLUETOOTH signal:
— Pairing and/or connecting with
BLUETOOTH device

— Using "SongPal" via BLUETOOTH

To turn on the BLUETOOTH signal, repeat
the procedure shown above.
PAIRING
19
GB