Sony GTK-XB7 Mode D'emploi page 24

Enjoying the Party Chain
1
Plug in the AC power cord
and turn on all the systems.
2
Adjust the volume on each
system.
3
Activate the Party Chain
function on the system to be
used as the Party Host.
Example: When using this system
as the Party Host
 Press FUNCTION
repeatedly to select the
function you want.
When you connect using 
(page 22), do not select the
Audio In function. If you select
this function, the Party Chain
function cannot be activated.
 Start playback, then press
PARTY CHAIN on the unit.
The PARTY CHAIN indicator
lights up. The Party Host starts
the Party Chain, and other
systems become Party Guests
automatically. All systems play
the same music as that being
played by the Party Host.
Notes
• Depending on the total unit of systems
you have connected, Party Guests may
take some time to start playing the music.
• Changing the volume level and sound
effect on the Party Host will not affect the
output on the Party Guests.
• For detailed operation on other systems,
refer to the operating instructions of the
systems.
24
GB
To select a new Party Host
Repeat step 3 of "Enjoying the Party
Chain" on the system to be used as a
new Party Host. The current Party Host
becomes Party Guest automatically. All
systems play the same music as that
being played by the new Party Host.
• You can select another system as the
• If the selected system does not become a
PAIRING
To deactivate the Party Chain
Press PARTY CHAIN on the Party Host.
If the Party Chain function is not deactivated
after a few seconds, press PARTY CHAIN on
the Party Host again.
Notes
new Party Host only after the Party Chain
function of all the systems in the chain
has been activated.
new Party Host after a few seconds, repeat
step 3 of "Enjoying the Party Chain."
Note