Husqvarna 536LiHE3 Manuel D'utilisation page 18

Inspection and maintenance
Li-ion Li-ion
WARNING! Always disconnect the
!
battery before any maintenace on the
machine.
IMPORTANT! Never clean the battery or the battery
charger with water.
Strong cleaning agents can damage the plastic.
All servicing and repair work on the machine requires
special training. This is especially true of the machine's
safety equipment. If your machine fails any of the checks
described below you must contact your service agent.
When you buy any of our products we guarantee the
availability of professional repairs and service. If the
retailer who sells your machine is not a servicing dealer,
ask him for the address of your nearest service agent.
Only use original spare parts.
Regularly check that the battery charger and the battery
are intact.
Cleaning
Clean the machine after use.
Make sure the battery and battery charger are clean and
that the terminals on the battery and the battery charger
18 – English
MAINTENANCE
are always clean and dry before the battery is placed in
the battery charger.
Keep the battery guide tracks clean. Clean plastic parts
with a clean and dry cloth.
Cleaning and lubrication
Clean any resin and plant residue from the blades using
cleaning agent before and after using the machine.
Check that the blade edges are not damaged or
deformed. File away any burrs. Check that the blades
move freely.
Lubricate the blade bars before long periods of storage.
Ask your dealer or Husqvarna should you need more
information.
Ask your dealer for information on lubrication points and
volume of grease in the gear. Use a high quality grease
intended for Husqvarna products.
Tilt adjustment of cutting unit
Adjust the tension of the tilt adjustment with the screw.
Turn the screw clockwise or counterclockwise in order to
easily tilt the cutting unit.