Husqvarna 536LiHE3 Manuel D'utilisation page 17

Changing the hedge trimmer angle
Disconnect the battery.
The cutting unit has 8 adjustment positions to make work
easier.
• Pull down the position adjustment handle.
• Tilt the cutting unit with its handle to the desired
position.
• Release the position adjustment handle so that the
cutting unit locks at the correct angle.
Transport position
• Always be sure to use the transport protection during
transport or long movements.
• Disconnect the battery.
• Tilt the cutting unit 180° towards yourself.
When the machine is in transport position, it cannot be
activated.
WORKING TECHNIQUES
–
English 17