Husqvarna 536LiHE3 Manuel D'utilisation page 11

Power trigger lockout
The power trigger is designed to prevent accidental
operation. It is necessary to press both the power trigger
lockout and the power trigger. The order actuation power
trigger lockout and power trigger doesn't matter. When
you release the handle, the power trigger and the power
trigger lockout both move back to their original positions.
This movement is operated by independent springs. This
arrangement means that the power trigger is
automatically locked at no operation state.
2
Turn on the machine.
Make sure the power trigger is locked when the power
trigger lock is in its original position.
Press the power trigger lockout and make sure it returns
to its original position when released.
Check that the power trigger and the power trigger lockout
move freely and that the return spring works properly.
The cutting unit must stop within 3 seconds.
See instructions under the heading Start. Start the
machine and apply full power. Release the power trigger
GENERAL SAFETY PRECAUTIONS
1
and check that the cutting attachment stops and remain at
a standstill.
Hand guard
Li-ion Li-ion
The hand guard prevents hands from coming into contact
with the moving blades, for example, if the operator loses
grip on the front handle.
• Check that the hand guard is fitted correctly.
• Check that the hand guard is undamaged.
–
English 11