Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Fitting the lower support frame using
an extension
1
Slide each part of the extension over the outside of
the upper support frame and use 16 screws to fit
them to the upper support frame..
2
Ensure that the lower support frame is in the
correct position.
Note: Position the open side of the lower support
frame opposite the open side of the upper support
frame.
12
3
Slide the lower support frame up into the extension
and use 16 screws to secure it at the established
total height.
Publicité
Chapitres
Table des Matières
