Before Using The Appliance For The First Time; Operating The Appliance; Turning On; Turning Off - Gaggenau VL 200 120 Notice D'utilisation

Before using the appliance for the first
time
B e f o r e u s i n g t h e a p p l i a n c e f o r t h e f i r s t t i m e
B efore using the appliance and accessory parts for the
first time, clean them thoroughly.

Before using the appliance for the first time

Operating the appliance

T urning on
O p e r a t i n g t h e a p p l i a n c e
Automatic mode, three fan settings, intensive mode Ž
and the intermittent ventilation system μ are available for
extraction.
Push in the control knob and turn it clockwise to the fan
setting you require.
The illuminated ring behind the control knob lights up.

Turning off

Turn the control knob anti-clockwise to position 0.

Intensive mode

Activate intensive mode if strong odors or large amounts
of steam are produced. In this mode, the appliance
operates at its maximum fan setting for a short time. After
approx. six minutes, the appliance automatically switches
back to fan setting 3.
Switching on
Push in the control knob and turn it clockwise to the
Ž position.
The intensive mode is activated. The illuminated ring
behind the control knob goes out briefly and then lights
up orange. A signal tone sounds.
Note: The run time of the intensive mode is six minutes.
Once this time has elapsed, the appliance switches back
to fan setting 3. A signal tone sounds. The control knob
remains in the Ž position. The illuminated ring behind
the control knob goes out briefly and then lights up
orange.
Switching off
Turn the control knob anti-clockwise to position 0.
en-us
13