Publicité
Les langues disponibles
Les langues disponibles
Using external equipment
Watching a DVD image
Connecting a DVD player
You can use the INPUT 3 terminal when connecting to a DVD player and other audiovisual equipment.
Media Receiver (rear view)
When using component cable,
select "COMPONENT" for "Input
Select" in the menu.
COMPONENT
Y
P
P
B
R
INPUT 3
MONITOR OUTPUT
S-VIDEO
VIDEO R–AUDIO–L
INPUT 2
SCART cable
(commercially available)
Component cable (commercially available)
MENU
Option
Input Select
INPUT3
[COMPONENT]
AV
Y/C
RGB
COMPONENT
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
SYSTEM
CABLE
RS-232C
(WHITE)
(GRAY)
IN
OUT
CONTROL
INPUT 1
AC INLET
Displaying a DVD image
When connecting to the INPUT 3 terminal, select
"INPUT3" and set the correct input signal type on "Input
Select" in the menu. (See page 49.)
The setting is stored and can be selected on the
"INPUT SOURCE" menu.
To watch a DVD image, select "INPUT3" from "INPUT
SOURCE" menu using b on the remote control unit
or INPUT on the Plasma Display. (See page 49.)
A
• Each time b is pressed, the input source toggles.
• If the DVD image does not come in clearly, you may need
to change the input signal type setting on the "Input Select"
menu.
• Refer to your DVD player operation manual for the signal
type.
DVD player
42
Publicité
