Tosai SRE 300 Mode D'emploi page 58

TROUBLE-SHOOTING Guide
Error codes along with lamp lights indicates malfunctions.
For SRE 300
For SRE 4600
Error Codes/ Lamps
All indication lamps are
glows:
<fan-mark> lamp glows / flash-
es :
<FUEL> lamp glow / flashes :
TIMING
Indications
(Devices/systems triggered)
<ON> key has been pressed for longer than 5 seconds.
Ignition failure or state of flames is unstable.
(Safety Ignition System has been triggered.)
Unnecessary water in the Unit.
(Safety Ignition System has been triggered.)
State of flames became unstable and flames abruptly go out.
(Combustion Control System has been triggered.)
Unnecessary water or scale in the drains in the Unit.
(Combustion Control System has been triggered.)
Earthquakes (seismic scale 5 or larger), strong impact on the
Unit (Auto shut-off Device has been triggered.)
The mobil tank is not in his place.
Overheat inside the Unit.
(Anti-overheat device has been triggered.)
Warm air blower (louver) is blocked, resulting overheating.
Plug is not properly in place.
Power failure (Safety Device has been triggered.)
Air intake filter is clogged with dust.
(Combustion Stabilizer has been triggered.)
Ventilation required.
(Combustion Stabilizer has been triggered.)
No fuel.
Unnecessary dust and/or water in fuel tank, fuel receiver, or
fuel filter.
56