Tosai SRE 300 Mode D'emploi page 49

ROOM TEMPERATURE ADJUSTMENT
For SRE 300
For SRE 4600
NOTES:
Preset temperature may not necessarily be in accordance with the actual temperature indicated on
the room thermometer, depending on the conditions.
The room temperature may reach above the programmed temperature;
this may happen with high outdoor temperatures or a small room.
TIMING
ROOM TEMPERATURE ADJUSTMENT
The Unit is preset to bring room temperature to 20 centigrade. This is
adjustable by pressing <TEMP. ADJUST SELECTOR> keys.
The system will automatically adjust the heat power according to the
programmed temperature.
Press <-(down)> key or <+(up)> key of <TEMPERATURE> key for de-
sired room temperature.
MODE SELECTION
Depending on your selection , you can select three modes,
SAVE , AUTO and MINI.
SAVE
Max Output
Min Output
Off
In SAVE mode
The heater automatically stop the operation when the room tempera-
ture goes up 2 centigrade higher than the setting temperature.
47
AUTO
Max Output
Min Output
MIN
Min Output