Tosai SRE 300 Mode D'emploi page 50

Time Adjustment
Time Adjustment
Time adjustment is available both on- and off-operation status.
Ex. To adjust to PM. 8:35
1.
Press on switch MODE one or two times for the hour appear on
the electronic display.
The display indicate "-:- - "
2.
Press the button - or + to select the hour
Press the key once and digital display will indicate «0:00», then the current time.
Time figure can be changed from the second press.
3.
Adjust to the correct time
Minutes can be adjusted by one minute at each press.
Keep the key pressed for a few seconds and the figure will continue to change.
After the minute reaches 10, figure changes by every ten minutes as shown in the illustra-
tion.
Press the key one at a time for the minute adjustment.
4.
Adjustment is now completed.
Wait few second without press and the selection of the hour will be memorised
Time figures when < + (up) > I s pressed.
48