Tosai SRE 300 Mode D'emploi page 42

Indication on Fuel filling
Flash + Buzzer...
The unit buzzers and the filling
sign lights 30 minutes and 5
minutes before the heater is
turned off.
Blink + Melody....
The heater is turned off because
the fuel is consumed.
Indication on Ventilation
Flash + Buzzer....
Ventilating the room is needed.
The unit buzzers
minutes until the ventilation is
completed.
Blink + Buzzers....
The heater turned off because
the ventilation is insufficient.
CHILD SAFETY LAMP
The lamp is lit: the child safety
mode is on.
DIGITAL INDICATORS
Indicates pre-heating, errors, elevation, temperature, current
time, and timer-programmed time.
Pre-heating
Errors
Elevation lamp is lit
Elevation adjustment is done.
Indications
pressing INDICATOR SELECTOR.
Temperature lamp is lit
Indicates pre-set temperature and
current temperature under auto-
matic operation mode.
(Example shows pre-set temperature at 22 and the current
temperature at 16)
Time lamp is light off
Indicates current time.
every 5
Timer-set time lamp is lit
Indicate the pre-set time for the
timer.
HEAT POWER LAMP
Indicates the heat power select-
ed.
50
(Example shows AUTO heat power at the current tempera-
ture of 20 degrees.)
45
56
will change by
40
44
47
48
49
47
11