Beurer 643.08 Mode D'emploi page 13

7. Unit description
3D Shiatsu massager
2
3
4
5
6
7
8. Initial use
• Remove the packaging.
• Check the device, mains part plug and cable for damage.
• Insert the connector plug into the socket on the Shiatsu massager.
• Ensure that the cable does not pose a trip hazard.
9. Operation
Switch on the Shiatsu massager with the
You can select the massage direction by pressing the
If you want to switch on the heat function, press the
heat function switches off.
You can select from 3 intensity levels using the -button. The device automatically starts on the lowest
intensity level.
Press the -button to switch the Shiatsu massager off again.
Note
• The massage should feel pleasant and relaxing at all times. If the massage is painful or uncomfort-
able, stop the massage or change the contact pressure using the handle.
• Use the Shiatsu massager for max. 15 minutes. Longer massages can lead to over-stimulation of
the muscles, creating tension instead of aiding relaxation.
• The Shiatsu massager features an automatic switch-off function, which is set to the maximum
operating duration of 15 minutes.
1
9
-button. The massage heads start to rotate.
1. 8x 3D massage heads (4 heated and
illuminated massage heads), rotating
in pairs
2 . Control element
8
3. -button
4. - button (anti-clockwise/clockwise
rotation of the massage heads)
5. -button (3 intensity levels)
6. -button (heat function)
7. Handles
8 . Mains adapter
9. Mains connection cable (cable is
secured to the side)
- button.
button. If you then press the
13
button again, the