Publicité
Les langues disponibles
Les langues disponibles
Training area in mm
(for home trainer and user)
Cleaning, Checks and Storage of the home bike:
1. Cleaning
Use only a less wet cloth for cleaning.
Caution: Never use benzene, thinner or other aggressive cleaning
agents for surface cleaning as this damage caused.
The device is only for private home use and for use suitable indoors.
Keep the unit clean and moisture from the device.
2. Storage
Remove the batteries from the computer while intending the unit
for more than 4 weeks not to use. Fold up the seat frame until it is
locked. Choose a dry storage in-house and spray some oil to the
thread of the handlebar bolt and on the thread of the quick release
for fold up function. Cover the bike to protect it from being discolor
by any sunlight and dirty through dust.
3. Checks
We recommend every 50 hours to review the screw connections for
tightness, which were prepared in the assembly. Every 100 operating
hours, you should spray some oil at the thread of the handlebar bolts
and to the thread of quick release for fold up function.
Free area in mm
(Training area and security area
(rotating 60cm))
Troubleshooting
If you cannot solve the problem with the following information,
please contact the authorized service center.
Problem
Possible Cause
Computer
No Batteries insert
has no value
or batteries empty
at Display if
you press any
key.
Computer is
Sensor impulse
not counting
missing base on
data and do
not well plugged
not switch
connection
on after start
cycling.
Computer is
Sensor impulse
not counting
missing base on
data and do
not correct position
not switch
of sensor.
on after start
cycling.
14
Solution
Check the position of batte-
ries at battery compartment or
replace batteries.
Check the plug connections at
computer and under the fold up
constrcution.
Check the distance between
magnet and sensor. The magnet
which is positioned at seat slide
should have only less than
< 5mm distance against the
sensor position.
Publicité
