Publicité
Les langues disponibles
Les langues disponibles
Step 4:
Attach the seat frame (3) at main frame (1).
1. Place the seat frame (3) against the main frame (1) and connect
the sensor cable (41) with connection cable (42).
2. Place the seat frame (3) into the holder of main frame (1), so that
the holes pattern and screw the seat frame (3) at main frame (1)
loosely by using screw M10x105 (11), washer (22) and nut (18).
(The seat frame (3) should be fold up easily.)
3. Secure the seat frame (3) during training through screw in the
star grip screw (30) with washer (21).
Step 5:
Attach the pedals (37) at main frame (1).
1. Put a pedal (37) on screw (10) and tighten the pedals (37) at
main frame (1) into appropriate position. Screw a screw (10)
in main frame (1) into appropriate position.
Step 6:
How to fold up.
1. To storage the item, screw out the star grip screw (30) with
washer (21) and fold up the Seat frame (3) of item into vertical-
ly position. Secure this position with star grip screw (30) and
washer (21) into the appropriate position at side of main frame
(1).
Step 7:
Checks
1. Check the correct installation and function of all screwed and
plug connections. Installation is thereby complete.
2. When everything is in order, familiarise yourself with the ma-
chine at a low resistance setting and make your individual ad-
justments.
Note:
Please keep the tool set and the instructions in a safe place as
these may be required for repairs or spare parts orders becoming
necessary later.
12
Publicité
