Publicité
Les langues disponibles
Les langues disponibles
Computer instructions
The supplied computer allows the most convenient training. Every value
relevant to training is displayed in a corresponding window.
From the beginning of the training session, the required time, beats / minute,
rower beats, the approximate calory consumption and the beats Total are
displayed. All values are counted from zero upwards.
The computer is switched on by briefly pressing the key or simply by be-
ginning training. The computer begins to register and display all values.
The strokes per minute is indicated on the upper display. All other values
are indicated on the lower display.
To stop the computer, just stop training. The computer stops all measure-
ments and retains the last attained values. The last attained values in the
functions TIME, ROWER BEATS, CALORIES are stored and training can
continue with these values when training is resumed.
The computer switches of automatically approx. 4 minutes after training is
stopped. All values attained until that time are stored and are displayed
again when training is resumed. It is then possible to continue training from
these values.
Displays:
1. „Zeit" display:
The currently required time is displayed in minutes and seconds.
The values last attained by this function are stored.
2. „Ruderschläge" display:
The current rowing beats are displayed. The values last attained by this
function are stored
3. "Schläge/Minute" (beats per minute) display:
The current speed in beats per minute is displayed. The values most recently
reached can not be saved in this function, as described above.
(Max. display limit is 199 beats per minute)
4. „Kalorien" display:
The current status of the consumed calories (Kcal) is displayed.
The values last attained by this function are stored.
5. „Schläge-Total" display:
The current rowing beats of all trainings sessions are displayed.
The values last attained by this function are stored
6. „SCAN" function:
If this function is selected, the current values of all functions are displayed
successively in a constant sequence approx. every 5 seconds.
Operating and exercising instructions
Exercise 1
a) Begin this exercise with your legs straight, knees together and
the upper part of your body upright.
b) Bend forward without bending your knees, grip the handle bar
and pull back until the upper part of your body is upright again.
Important: The oar levers should be pulled back with the arms (and
not with the body) until your hands have reached your body.
c) Bring the handle bar back to the starting position again.
d) Rest for a moment and then carry out the exercise again, repeating
it quietly and continuously.
Exercise 2
a) Begin this exercise sitting upright with the seat as far forward as
possible and your knees bent.
b) Push back with the legs keeping your knees together and at the
same time pulling the handle bar towards you.
c) Continue pulling until your legs are straight and your hands have
reached your body.
d) Relax your arms and legs and let the seat slide forward until you
have reached the start position (a) again and then repeat the
exercise again.
1. Key:
Pressing this key once briefly makes it possible to change from one function
to another. The currently selected function is indicated by an icon in the
respective window.
If the key is held longer (approx. 3 seconds), all last attained values are
deleted with the exception of the values in the "Schläge-Total" display.
Pulse-Display:
Shows actually heart rate data. The pulse display has 2 batteries inside
(Battery type 2x Micro "AAA").
The housing can be opened by screws, to replace the batteries.
13
Publicité
