Publicité
Les langues disponibles
Les langues disponibles
Assembly Instructions
Remove all the separate parts from the packaging, lay them
on the floor and check that all are there on the basis of the
packing list in these instructions for assembly and use. Please
note that a number of parts have been connected directly to
the main frame and preassembled.In addition, there are seve-
ral other individual parts that have been attached to separate
units. This will make it easier and quicker for you to assemble
the equipment. Assembly time: 25 min.
Step 1:
Attach the rear foot (4) at seat slide (3).
1. Put the rear foot (4) into the holder at seat
frame (3) and screw it tightly by using 4
screws M8x16 (13), washers (20) and spring
washers (19).
Step 2:
Attach the seat (28) at seat slide (3).
1. Remove the cushion pad (36) and screw (13) from seat rail (3).
2. Push the seat frame (3) through the seat slide (28) as showed,
so that 4 pulleys can roll onto the top side and 2 pulleys can roll
onto the bottom side of seat frame (3).
3. Fix the cushion pad (36) at appropriate position on bottom side
of seat frame (28).
Step 3:
Attach the Front Foot (2) at main frame (1).
1. Place the front foot (2) into the holder in front of the main fra-
me (1) and screw it tightly by using 2 carriage bolts M8x45 (9),
washers (20), spring washers (19) and cap nuts (15).
11
Publicité
