JVC KD-BT1 Manuel D'instructions page 15

6
Use the Bluetooth device to search and
connect.
On the device to be connected, enter the same
PIN code you have just entered for this unit.
"Connected (and device name)" appears on the
display.
Now connection is established and you can use the
device through the unit.
The device remains registered even after you
disconnect the device. Use "Connect" (or activate
"Auto Connect") to connect the same device from
next time. (See the right column and page 36.)
Searching for available devices
Perform steps 1 – 3 on page 14, then...
1
Select "Search."
The unit searches and displays the list of the
available devices.
• If no available device is detected, "Device not
found" appears.
2
Select a device you want to connect.
3
Enter the specific PIN code of the device to
the unit.
• Refer to the instructions supplied with the device
to check the PIN code.
4
Use the Bluetooth device to connect.
Now connection is established and you can use the
device through the unit.
Connecting a special device
Perform steps 1 – 3 on page 14, then...
1
Select "Special Device."
The unit displays the list of the preset devices.
2
Select a device you want to connect.
3
Use "Open" or "Search" to connect.
Connecting/disconnecting a registered device
"Bluetooth Phone" or "Bluetooth
1
Select
Audio."
2
Select a registered device you want to
connect/disconnect.
3
Enter setting menu.
4
Select "Connect" or "Disconnect" to connect/
disconnect the selected device.
You can set the unit to connect a Bluetooth device
automatically when the unit is turned on. (See
"Auto Connect" on page 36.)
OPERATIONS
Continued on the next page
15