Publicité
Les langues disponibles
Les langues disponibles
Care and cleaning
Warning! Switch the appliance off
before you clean the filters.
Cleaning the filters
Caution! Do not use the appliance
without the filters. Make sure that the
installation of the filters is correct.
Incorrect installation will cause
unsatisfactory washing results and
damage to the appliance.
If necessary, clean the filters. Dirty filters de-
crease the washing results.
The dishwasher has three filters:
1. coarse filter (A)
2. microfilter (B)
3. flat filter (C)
A
B
C
Do these steps to clean the filters:
1. Open the door.
2. Remove the lower basket.
3. To unlock the filter system, turn the han-
dle on the microfilter (B) approximately
1/4 anticlockwise.
4. Remove the filter system.
All manuals and user guides at all-guides.com
5. Hold the coarse filter (A) by the handle
6. Remove the coarse filter (A) from the mi-
7. Remove the flat filter (C) from the bottom
8. Clean the filters below running water.
9. Put the flat filter (C) in the bottom of the
10. Put the coarse filter (A) in the microfilter
11. Put the filter system in position.
12. To lock the filter system, turn the handle
13. Install the lower basket.
14. Close the door.
If the holes in the spray arms become clog-
ged, remove remaining parts of soil with a
cocktail stick.
External cleaning
Clean the external surfaces of the appliance
and control panel with a damp soft cloth.
Only use neutral detergents. Do not use
abrasive products, scouring pads or solvents
(acetone, trichloroethylene etc...).
Frost precautions
If not possible, empty the appliance and
close the door. Disconnect the water inlet
with the hole.
crofilter (B).
of the appliance.
appliance.
(B) and push the filters together.
on the microfilter (B) clockwise until it
lock in position.
Do not remove the spray arms.
Caution! Do not install the appliance
where the temperature is below 0 °C.
The manufacturer is not responsible for
damage because of frost.
electrolux 31
Publicité
