OSOTEK Horizon H200 Mode D'emploi page 6

Installation
Install the Roller Brush
1. Press the two removal keys of the roller brush cover inward at the same time to remove the
roller brush cover.
2. Remove the brush protector.
3. Press the roller brush holder as shown, put the roller cloth on the roller brush holder, and press
the roller cloth firmly to install it in place.
1
4. Install the roller brush, rotate the lock to the locked position and install the roller brush cover.
Tips: When a new dry roller brush is used for the first time, it is normal for it to vibrate slightly
when it rubs against the ground. The roller brush can be used normally after it is completely wet.
1
5
2 3
2 3