OSOTEK Horizon H200 Mode D'emploi page 16

4. Use tap water to rinse the roller brushbar and its cover until they are clean, and then put them in
the accessory container for drying to prevent odors.
Note: Do not expose the roller brushbar to direct sunlight.
5. Use a dry cloth or paper towel to remove the hair, dirt, and foreign objects blocked at the suction port.
Notes:
• Do not rinse the floor brush directly.
• Do not touch the gearbox right after using the vacuum to avoid scalds.
6. Reinstall the roller brushbar and its cover in order. When reinstalling the roller brushbar cover,
align it with the mounting position, and it is secured in place when you hear a click.
Gearbox
15
Click