OSOTEK Horizon H200 Mode D'emploi page 20

Specifications
OSOTEK Horizon Wet Dry Vacuum H200
Name Wet and Dry Vacuum Cleaner
21.6 V ⎓
Rated Voltage
26.0 V ⎓
Charging Voltage
Self-cleaning Charging Dock
Name
Model A022H12CS
26.0 V ⎓ 0.9 A
Rated Output
Power Supply
Zhongshan Baolijin Electronic Co.,
Manufacturer
Ltd.
Model BLJ24WD260090P-V
Input 100–240 V ~ 50/60 Hz 0.8 A
26.0 V ⎓ 0.9 A 23.4 W
Output
Model WSB22E.12
Rated Power 200 W
Net Weight 5.3 kg
Charging Dock
26.0 V ⎓ 0.9 A
Rated Input
Net Weight 0.6 kg
Average Active
87.0%
Efficiency
Efficiency at Low Load
79.2%
(10%)
No-load Power
0.10W
Consumption
Environmental Notice
The lithium-ion battery pack contains substances that are hazardous to the environment.
Before disposing of the vacuum, please first remove the battery pack, then discard, or recycle it
in accordance with local laws and regulations of the country or region it is used in.
CAUTIONS:
• Remove the entire battery pack together, and make sure not to damage the outer casing of the
battery pack to prevent short-circuiting or leakage of harmful substances.
• In the event of a battery leak, avoid contact with the liquid. If the liquid enters the eyes, rinse
with plenty of water and seek medical attention immediately.
• The battery should not be removed by non-professionals. Otherwise, it may lead to a short
circuit or other risks. It is recommended to send the product to the professional after-sales
service team or a government-approved recycling facility for removal.
Steps to Remove the Battery:
1. Use a non-sharp tool to press and hold the handle release button on the back of the vacuum,
and simultaneously pull the handle upwards vertically.
2. Remove the dirty water tank.
3. Unscrew the display assembly to remove it.
4. Remove the rear cover of the vacuum by unscrewing the bottom cover, the front cover, and the
rear cover of the vacuum.
5. Unscrew the battery pack assembly to remove it.
6. Unscrew the top and bottom covers of the battery pack assembly and remove the top cover.
7. Unscrew the battery pack assembly, and unplug the battery pack to remove it.
Warrant Information
The warranty period depends on the laws of the country in which the product is sold, and the
warranty is the responsibility of the seller.
The warranty only covers defects in material or workmanship.
The repairs under warranty may only be carried out by an authorized service center.
When making a claim under the warranty, the original bill of purchase (with purchase date) must
be submitted.
The warranty will not apply in cases of:
i. Failures caused by:
1) Use of a OSOTEK product which is not in accordance with the "Usage Restrictions" in the User
Manual.
2) Use of a OSOTEK product for cleaning white ashes, sand and other non-household garbage.
3) Use of a OSOTEK product for decoration, ornament or cleaning in a commercial environment.
4) Use of a OSOTEK product for cleaning in an environment with special adsorption chemicals,
metal or other microparticles.
5) Use of a OSOTEK product in an environment with corrosive objects.
6) Use of a OSOTEK product in an improper voltage supply environment.
ii. The product you purchased is a prototype, the model or SN of which does not follow the SN
coding rule for a brand-new complete machine.
Please consult us for any unclear terms.
e-mail: support-global@osotek.com
19