DeWalt DW712 Manuel D'utilisation page 32

EN G LI S H
MAINTENANCE
Your D WALT power tool has been designed to operate over a long
E
period of time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Cleaning
Keep the ventilation slots clear and regularly clean the housing with a
soft cloth.
• Regularly clean the table top.
• Regularly clean the dust collection system.
Avoid the use of cleaners or lubricants to maintain the tool.
In particular spray and aerosol cleaners may chemically
attack the plastic lower guard.
CLEANING AND MAINTAINING THE KERF PLATE (FIG. U)
Regularly clean the area below the kerf plate.If the kerf plate is worn it
must be replaced.
• Remove the screws (67) holding the kerf plate (31).
• Remove the kerf plate and clean the area below.
• Re-install the parts of the kerf plate and the screws.
• Tighten the screws hand-tight.
• To adjust the kerf plate, proceed as follows:
• Pull down the head until the blade just enters the saw kerf.
• Adjust each part of the kerf plate to fit closely to the teeth of the
blade.
• Tighten the screws.
Protecting the Environment
Separate collection. This product must not be disposed of with
normal household waste.
Should you find one day that your D
or if it is of no further use to you, do not dispose of it with household
waste. Make this product available for separate collection.
Separate collection of used products and packaging allows
materials to be recycled and used again. Re-use of
recycled materials helps prevent environmental pollution
and reduces the demand for raw materials.
Local regulations may provide for separate collection of electrical
products from the household, at municipal waste sites or by the retailer
when you purchase a new product.
D WALT provides a facility for the collection and recycling of D
E
products once they have reached the end of their working life. To take
advantage of this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by
contacting your local D WALT office at the address indicated in this
E
manual. Alternatively, a list of authorised D
full details of our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
30
WALT product needs replacement,
E
WALT
E
WALT repair agents and
E
GUARANTEE
• 30 DAY NO RISK
SATISFACTION GUARANTEE •
If you are not completely satisfied with the performance of
your D WALT tool, simply return it within 30 days, complete
E
as purchased, to the point of purchase, for a full refund or
exchange. Proof of purchase must be produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your D
in the 12 months following purchase, it will be undertaken
free of charge at an authorized D
of purchase must be produced. Includes labour and spare
parts for Power Tools. Excludes accessories.
• ONE YEAR FULL WARRANTY •
If your D WALT product becomes defective due to faulty
E
materials or workmanship within 12 months from the date of
purchase, we guarantee to replace all defective parts free of
charge or, at our discretion, replace the unit free of charge
provided that:
• The product has not been misused.
• Repairs have not been attempted by unauthorized
persons.
• Proof of purchase date is produced. This guarantee
is offered as an extra benefit and is additional to
consumers statutory rights.
For the location of your nearest authorized D
agent, please use the appropriate telephone number on
the back of this manual. Alternatively, a list of authorized
D WALT repair agents and full details on our after-sales
E
service are available on the Internet at www.2helpU.com.
WALT tool,
E
WALT repair agent. Proof
E
WALT repair
E