Settings; Canceling The Demo Mode; Basic Setting Operation; General Setup - Sony XSP-N1BT Mode D'emploi

Activating voice recognition (Android
phone only)
By registering applications, you can control an
application by voice command. For details, refer to
the help of the application.
To activate voice recognition
1
Press ENTER on the remote or VOICE on the main
unit to activate voice recognition.
2
Say the desired voice command into the
microphone when [Say Source or App] appears on
the Android phone.
Notes
 Voice recognition may not be available in some cases.
 Voice recognition may not work properly depending
on the performance of the connected Android phone.
 Operate under conditions where noise such as engine
sound is minimized during voice recognition.
When a music or video application is
selected*
Press / to enter HID mode, and press ///
 to select a playback item, then press ENTER to
start playback.
* Available only for an Android phone supporting
HID (Human Interface Device Profile).
Making sound settings
You can adjust the settings for EQ, BAL/FAD/SW
Level and Position via your smartphone.
For details on settings, refer to the help of the
application.
Showing the unit status (Android phone
only)
The smartphone display can be used as the display
window of the unit since the unit's display window
is not visible when the smartphone is placed on the
unit.

Settings

Canceling the DEMO Mode

You can cancel the demonstration display which
appears while this unit is turned off.
1
Press and hold MENU.
2
Press / to select [DISPLAY], then press
ENTER.
3
Press / to select [DEMO], then press
ENTER.
4
Press / to select [DEMO-OFF], then
press ENTER.
The setting is complete.
5
Press (back) twice.
The display returns to normal reception/play
mode.

Basic Setting Operation

You can set items in the menu to the following
procedure.
The following items can be set depending on the
source and setting.
1
Press and hold MENU.
2
Press / to select the setup category,
then press ENTER.
Setup categories are follows:
 GENERAL setup (page 17)
 SOUND setup (page 18)
 DISPLAY setup (page 19)
 BT (BLUETOOTH) setup (page 19)
 APP REM (App Remote) setup (page 20)
3
Press / to select the options, then
press ENTER.
To return to the previous display
Press (back).

GENERAL Setup

CLOCK-ADJ (clock adjust) (page 7)
CHARGE
Switches the current (A) capacity of the USB
port: [CHARGE HIGH], [CHARGE STD]. (Available
only when the unit is turned off.)
17
GB