Menu Type; Stand-By; Status Buzzer; Set Night T - Palazzetti Ecofire Série Instructions D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour Ecofire Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

7.6.3.4 MENU TYPE

4) Select the MENU TYPE by pressing on
5) Press ON to access settings. The active mode
ÀDVKHV ROLLING).
6) Press
or
7) Press ON WR FRQ¿UP \RXU FKRLFH
To exit the menu:
12) Press OFF to exit the MENU TYPE menu.
13) Press OFF to exit the MENU SET STOVE.
)
Use in the SHORT mode is explained in paragraph 7.6.4.
When the stove leaves the factory it is set on the
ROLLING more.

7.6.3.5 STAND-BY

4) Select STAND-BY by acting on
The current state will be visualised.
5) Press ON to access the settings. The activated
PRGH ZLOO ÀDVK OFF).
6) Press
or
7) Press ON to confirm and move onto the
temperature.
8) Press or to choose the restart temperature
"START TEMP. ".
9) Press ON WR FRQ¿UP
To exit the menu:
12) Press the OFF key to exit the menu STAND-BY.
13) Press the OFF key to exit the menu MENU SET
STOVE.
The
symbol will always appear onto the display
while the message "STAND-BY" will appear
when the room temperature is higher than the
temperature set in "START TEMP. ".

7.6.3.6 STATUS BUZZER

4) Select STATUS BUZZER by acting on
5) Press ON to access the settings. The activated
PRGH ZLOO ÀDVK ³ON".
6) Press
or
or the deactivation (OFF) of the function.
7) Press ON WR FRQ¿UP
To exit the menu:
12) Press the OFF key to exit the menu STATUS
BUZZER.
13) Press the OFF key to exit the menu MENU SET
STOV.

7.6.3.7 SET NIGHT T.

4) Select SET NIGHT T. by acting on
5) Press ON to access the setting, the activated
PRGH ZLOO ÀDVK OFF).
60/172
USE AND MAINTENANCE
to choose the type of menu.
or
to choose the mode.
to select the activation (ON)
or
6)
Press
value or the deactivation (OFF) of the function
or
7) Press ON WR FRQ¿UP
To exit the menu:
12) Press the OFF key to exit the menu SET NIGHT
T.
13) Press the OFF key to exit the menu MENU SET
STOVE.
The
symbol will always appear onto the display
while the message "STAND-BY NIGHT" will appear
when the room temperature is higher than the
temperature set in "SET. NIGHT".

7.6.3.8 KEYLOCK

4) Select KEYLOCK by acting on
5) Press ON to access the settings. The activated
PRGH ZLOO ÀDVK OFF).
6) Press or to select the activation (ON) or the
deactivation (OFF) of the function.
7) Press ON WR FRQ¿UP
To exit the menu:
12) Press the OFF key to exit the menu KEYLOCK.
13) Press the OFF key to exit the menu MENU SET
STOVE.
To activate or deactivate the block key function,
simultaneously press ON and OFF.

7.6.3.9 RESET

4) choose RESET by pressing
5) Press ON to acess o the settings. The actual
mode (NO) will blink.
6) Press
or the de-activation (NO) of the function.
7) Press ON WR FRQ¿UP
To exit from the menu:
12) Press the key OFF to exit from the RESET
menu.
13) Press the key OFF to exit from the MENU SET
or
STOVE.
By confirming YES the message "DONE" will
appear

7.6.3.10 ECONOMY

4) Choose ECONOMY by pressing
5) Press ON to access to the settings. The actual
power (P=5) will blink.
6) Press
automatic mode.
7) Press ON WR FRQ¿UP
To exit from the menu:
12) Press the key OFF to exit from the ECONOMY
menu.
.
13) Press the key OFF to exit from the MENU SET
STOVE.
cod. 00 477 1490 - 11/2013 - PN - Italy
or
to select the desired temperature
or
or
to select the activation (YES)
or
to change the power level in
or
.
.
or
.

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières