Ravelli RBH 150 V Manuel D'utilisation Et D'entretien page 88

Masquer les pouces Voir aussi pour RBH 150 V:
Table des Matières
Les langues disponibles
  • FR

Les langues disponibles

Rev.2 14/01/2021
Pag.32
The display is subdivided into three parts
you press the DOWN scroll key you will
1
DOWN keys. Any change made is confirmed automatically within 3 seconds from the change or by pressing the confirmation key. A
sound signal indicates that the change has been confirmed
In the inactive phases (combined with the 3rd part of the display) indicates the state of the stove.
2
In the active phases, it indicates the operating power of the stove.
In addition, by pressing the DOWN scroll button, you can display the power settings, that can be edited using the two scroll
keys UP/DOWN: The confirmation of any change takes place automatically within 3 seconds from the change or by pressing the
confirmation key. A sound signal indicates that the change has been confirmed. .
Icon that indicates the status of the thermo-stove (see synthetic phase diagram).
Press the key
below:
POWER: It shows the real power that can be
PUMP: the writing ON indicates that the circulator is active and enables water circulation within house system;
3-WAY VALVE: it shows the position of any 3-way valve installed, if there is a quick DHW heat exchanger installed or a DHW boiler
PRESSURE: it indicates the actual pressure of the system read by the transducer installed on the stove.
Press this key to return to STAND-BY page.
All manuals and user guides at all-guides.com
Use and maintenance manual RBH 150 V - RBH 200 V
It shows the current room temperature measured by the handheld set. Moreover, if
from STAND-BY mode to quickly display the real and active states of the stove as shown in the figure
POWER
PUMP
PRESSURE 1.1 bar
- MIN: minimum settable power (see power selection menu);
- MAX: maximum settable power (see power selection menu);
- MOD: stove modulation with set parameters reached;
- SANI: if the quick DHW kit is provided, as soon as there is a request for
display the temperature settings that can be changed using the two UP/
the stove is set to maximum power each time it is turned on
domestic hot water, the stove switches to DHW power
automatically;
Table des Matières
loading

Ce manuel est également adapté pour:

Rbh 200 v

Table des Matières