Publicité
Les langues disponibles
Les langues disponibles
HIGH. As you adjust it from HIGH to LOW, the
screen switches to black and white mode under
the darker situation.
DWELL TIME of DAY NIGHT sets the time to
maintain switched black and white mode.
The BRIGHTNESS of NIGHT DAY sets the
brightness degree of BW to color switching, for
which you can select from LOW, MID, and HIGH.
As you adjust it from HIGH to LOW, the screen
switches to color mode under the darker situation.
DWELL TIME of NIGHT DAY sets the time to
maintain switched color mode.
The MASK AREA menu is used to prevent
unintended mode switching or inability of
determining the switching due to existence of
high spot light source at night.
If you press the SETUP switch in item 1 or 2 of
the MASK AREA menu, you will see a menu
where you can specify an area to MASK.
MASK AREA
<SIZE>
<LOCATION>
You can specify MASK 1 and 2 simultaneously.
All manuals and user guides at all-guides.com
How to use OSD Menu
The MASK is only for determining the mode
switching, and any excessive bright area at night
will be excluded by the confi gured MASK.
Note :
If BACKLIGHT is set to BLC, the MASK AREA function will
–
be deactivated.
•
EXT
This enables an auto switch between DAY and NIGHT
mode using the interface with the external sensor.
❖
WHITE BAL
If you want to adjust the color scheme, use the
WHITE BALANCE function.
•
DAY
In DAY mode, you can set the color values of
RED and BLUE. The screen will be displayed in
colors according to your settings.
WHITE BAL
DAY/NIGHT
MODE
RED
BLUE
R-GAIN
B-GAIN
Note :
You can set the values of R-GAIN and B-GAIN only in
–
AWC mode.
[DAY/NIGHT]
DAY
AWC
[00]----I----
[00]----I----
[0248]
[0247]
English
23
–
Publicité
