KALIREL Cyclope Notice D'emploi page 28

4.1.5 Turning the thermostat off
Hold down button
then release it. The thermostat
stops.
To turn the thermostat on again
press button
5.1 Auxiliary functions
The thermostat is equipped with an electronic
key ➄. The key gives you access to the
auxiliary functions.
5.1.1 Blocking thermostat
functions
You can prevent any change
in operating mode and the
temperature the thermostat is
set to.
FUNCTION LOCK 1
Button ➂ is deactivated.
It is only possible to set the temperature.
Place the key near the circle on
the thermostat making sure you
hold the key the right way up.
(See photo above).
Flashing blue light.
Press button ➂ until the Comfort
light comes on.
Flashing red light.
Move the key away.
The blue light stops flashing.
The red light stops flashing.
Function lock 1 is now activated.
CLASSIC ® ELECTRONIC THERMOSTATS
User instructions
3
for 5 seconds
briefly.
3
FUNCTION LOCK 2
Button ➂ and the temperature control knob ➁
are deactivated.
Place the key near the circle.
Flashing blue light.
Press the button until the
economy light starts flashing.
Flashing green light.
Move the key away.
The blue light stops flashing.
The green light stops flashing.
Function lock 2 is now activated.
When these function locks are activated
!
any pressing of the button or turning of the
temperature knob is indicated by the flashing
blue light .
5.1.2 Unlocking he thermostat functions
Place the key near the circle.
Flashing blue light.
Press on the button several times
until the blue light starts flashing.
Move the key away.
The blue light stops flashing.
The function locks are now
deactivated.
27