KALIREL Cyclope Notice D'emploi page 27

3.1.3 Connecting to the external command
Use the pilot wire. Connect the electric wire to
the programming base unit fitted with a pilot
wire.
If the pilot wire is not connected to a
!
programming base unit then it must be
insulated for safety reasons. In no event
should it be connected to the earth.
4.1 Use
4.1.1 Operating characteristics
The operating characteristics are:
- Controlling the temperature.
- Selecting and controlling the operating mode.
- Controlling the intensity of the LEDs
(thermostat lights
4.1.2 Controlling the temperature
2 Turn the knob until you obtain
-
the required temperature.
3
4.1.3 Selecting and controlling
the operating mode
Press the button
3
the desired operating mode.
The operating mode changes with each brief push
of the button. The selected mode is indicated by
status light .
1
In addition to showing the operating mode the
!
status lights also show the status of the
thermostat's auxiliary functions. See § 5.1.
AUTOMATIC COMFORT
26
CLASSIC ®
).
1
and release it to select and control
ECONOMY FROST-PROTECTION
ELECTRONIC THERMOSTATS
User instructions
AUTOMATIC MODE
Blue light on
COMFORT MODE
Red light on
ECONOMY MODE
Green light on
FROST–PROTECTION MODE
Flashing green
light
4.1.4 Identifying malfunctions
HEATING ELEMENT
Red light on
Flashing red light
If the pilot wire is connected, the mode is
controlled by the signal emitted by the
programming base unit. § 6.1. The
selected mode is indicated by the status
light. If the pilot wire IS NOT connected,
then the thermostat is controlled in
comfort mode and the red light comes.
If the thermostat is connected to the
Cyclope ® radio control, the operating
mode is controlled by the signal emitted
by the radio control.
The normal comfort operating mode
is on. The temperature is that dialled
by knob ➁.
The night-time economy mode is on.
The temperature is automatically 3.5°C
lower than that of the comfort mode.
The frost-protection mode is on.
The temperature is set at 7°C. This
minimal temperature means material
runs no risk of freezing up.
The heating element is operating
normally.
There is a problem with the
thermostat.