Prerequisites For Installing; The Smartlink Software - dosatron SD25AL5 Manuel D'utilisation

PREREQUISITES FOR INSTALLING THE SMARTLINK SOFTWARE
(Operating software for PC or MAC for the dosing pump data
and processing operations recorded by your Smart Dosing devices)
Prerequisites for using the Smartlink software:
- 2 Go of live RAM memory (4 Go recommended,
especially for Windows Server 2008
- free space on hard drive – 1 Go
- 1 graphic board (1024 x 768 minimum)
It is recommended that the last pilots be installed
for your graphic boards
It is recommended that the latest version
of the anti-virus software that you use be
installed.
Operating system
The Smartlink software is a Windows
Mac OS application which works with the
following operating systems:
- Windows 10 x86 y x64
®
- Windows 8.1 x86 y x64
®
- Windows 7 x86 y x64
®
- Windows XP SP3 x86 (warning: this operating
®
system is no longer maintained by Microsoft)
- Mac OS 10.X
It is recommended that of the latest Service
Packs and critical updates for the version of
Windows /Mac OS that you use be installed.
®
Other software resources required
The following software resources (generally
)
®
installed by default with the operating system)
are necessary for the operation of the SmartLink
software:
- Microsoft Internet Explorer 6 minimum
- Safari
Other prerequisites
- The physical machine hosting the SmartLink
software must be connected to an uninterruptable
power supply.
- An automatic backup compliant with your
32 bits/
®
Quality Management system (frequency,
preservation period) must be set up.
© ©
DOSATRON INTERNATIONAL S.A.S. / 30 DOSATRON INTERNATIONAL S.A.S. / 66