dosatron SD25AL5 Manuel D'utilisation page 56

PROCESSING OPERATION RECORDING
Function which enables the volumes of water processed, of treatment injected
and the duration of processing to be recorded with the SD25AL5 dosing system
Before initiating recording of a processing operation:
• Estimate the volume of water consumed by the animals over the duration of processing
• Adjust the percentage of dosing on the calibration scale of the dosing assembly
• Rinse the doser and the tank to remove any residue
• Prepare the necessary volume of the mother liquid
• Open the valves of the Dosatron bypass and close the main circuit valve
Medication
Medication
NON NO
1. Initialize the level
2. Fill the tank
YES OUI
© ©
DOSATRON INTERNATIONAL S.A.S. / 20 DOSATRON INTERNATIONAL S.A.S. / 56
Press on to validate
Initiation and stopping of processing recording:
Choice of processing: medication/M,
vaccination/V, acidification/A, rinsing/R
disinfection/D, other/X
Press on to validate
Validation screen to initiate the recording
Press on to validate
1. Initialisation of the tank level:
Raise the level sensor if it was immersed to
remove any accumulated liquid inside the
small level detection pipe. (Remove moisture
by shaking the pipe before plunging it in the
processing mother liquid)
2. Fill the tank with the previously calculated
processing volume
3. Press on to validate