Philips Azur GC4250 Mode D'emploi page 10

ENGLISH
10
All manuals and user guides at all-guides.com
Steam and boiling water will come out of the soleplate. Impurities and
B
flakes (if any) will be flushed out.
7 Release the calc-clean button as soon as all the water in the
tank has been used up.
Repeat the calc-clean process if the iron still contains a lot of impurities.
After the calc-clean process
- Put the plug in the wall socket and let the iron heat up to allow the
soleplate to dry.
- Unplug the iron when it has reached the set ironing temperature.
- Move the hot iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.
- Let the iron cool down before you store it.
Storage
1 Make sure the appliance is unplugged and set the steam control
to position 0.
2 Empty the water tank.
C
3 Put the iron on the heat-resistant protective cover.
Do not use the heat-resistant protective cover during ironing.
C
4 Wind the mains cord around the cord storage facility.
5 Store the iron with the heat-resistant protective cover
horizontally on a stable surface.