Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
NOTE:
1. The salt container must only be refilled when
the salt warning light in the control panel
comes on. Depending on how fully the salt
dissolves, the salt warning light may still be on
even though the salt container is filled.
If there is no salt warning light in the control
panel (For some Models), you can judge
when to load the salt into the softener by the
cycles that the dishwasher had run.
2. If there are spills of the salt, a soak or a rapid
program should be run to remove theexcess
salt.
Adjusting Salt Consumption
Step 1: Enter the status of salt adjustment
Close the door, within 60 seconds after power on,
press Program button and hold for 5 seconds, the
machine will enter setting mode.
GB-20
All manuals and user guides at all-guides.com
Publicité
